ADS-410 Gen5 IoT Sensor Node
Infinite Informatics Ltd

Overview

The ADS-410 incorporates a Milli 5 embedded wireless communication module. The purpose of the device is to connect multiple sensors, from any vendor such as analogue (0-20mA, 0-1V), SDI12, RS485 Modbus, measure and transmit the data over the Itron network. The unit incorporates a Lithium Battery used for system operation and transducer excitation, for up to 10 years. Built with military level specifications. Integrated on the Itron SLV. Connectivity with any SCADA system using a software gateway and any communication protocol like DNP3, IEC60870-101/104, IEC61850, OPC, Modbus, etc.

Features

• Power supply: 3.6V, 13 Ah Lithium Thionyl battery, D-size, or 5Vdc mains
  
• Consumption: Continuous 18μA
  
• Analogue inputs: One input configurable as 0-1V, 0/4-20mA 12 bit resolution
  
• Digital inputs: one 0-30VDC, also counter up to 1 KHz
  
• SDI-12 Bus: 8 Channels, up to 3 sensors
  
• RS-485, MODBUS: 8 Channels, up to 3 sensor support, ASCII/RTU
  
• Battery Monitoring: continuous battery consumption measurement
  
• Transducer excitation: 12V/250mA, 5V/200mA
  
• Wireless modem: Milli 5 Itron/Silver Spring networks
  
• Data Messages: Variable length MQTT
  
• Antenna: SMA connector, external
  
• Temperature: -40°...+65°C, operating
  
• Dimensions: 79.5 x 125 x 61 mm (with cable gland)
  
• Housing: IP68 Nema 4x, Polycarbonate
  

Benefits

• The unit is battery powered for autonomous operation.
  
• Any telemetry application can be realized with the ADS-410.
  
• Virtually any sensor can be connected on the ADS-410 and powered using the built in battery.
  
• Itron SLV platform ready
  
• Connectivity with any SCADA system